elraidelsrobinsons

Wednesday, June 27, 2007

Superscalar

A superscalar CPU architecture implements a form of parallelism called Instruction-level parallelism within a solitary processor. It thereby allows faster CPU throughput than would otherwise be possible at the same clock rate. A superscalar architecture executes more than one instruction during a single pipeline stage by pre-fetching several instructions and at the same time dispatching them to redundant functional units on the processor.

History

Seymour Cray's CDC 6600 from 1965 is often mentioned as the first superscalar plan. The Intel i960CA and the AMD 29000-series 29050 microprocessors were the first commercial single-chip superscalar microprocessors. RISC CPUs like these brought the superscalar idea to micro computers because the RISC design results in a simple core, allowing straightforward instruction send off and the inclusion of multiple functional units on a single CPU in the inhibited design rules of the time. This was the reason that RISC designs were faster than CISC designs through the 1980s and into the 1990s.

Sunday, June 24, 2007

Neem oil

Neem oil is a vegetable oil pressed from the fruits and seeds of Neem, an evergreen tree which is endemic to the Indian sub-continent and has been introduced to many other areas in the tropics. It is perhaps the most significant of the commercially available products of neem.
Neem oil is typically light to dark brown, bitter and has a rather strong odour that is said to join the odours of peanut and garlic. It comprises mainly triglycerides and large amounts of triterpenoid compounds, which are in charge for the bitter taste. It is hydrophobic in nature and in order to emulisify it in water for application purposes, it must be formulated with suitable surfactants.
Neem oil also contains steroids and a plethora of triterpenoids of which Azadirachtin is the most well known and studied. The Azadirachtin content of Neem Oil varies from 300ppm to over 2000ppm depending on the quality of the neem seeds compressed.

Tuesday, June 19, 2007

Swan

Swans are large water birds of the family Anatidae, which also includes geese and ducks. Swans are grouped with the intimately related geese in the subfamily Anserinae where they form the tribe Cygnini. Sometimes, they are considered a distinct subfamily, Cygninae.

Swans typically mate for life, though "divorce" does sometimes occur, mainly following nesting failure. The number of eggs in each clutch is between 3–8.
The word is derived from Old English swan, akin to German Schwan, in turn derived from Indo-European root *swen (to sound, to sing), whence Latin derives sonus (sound). Young swans are known as cygnets, from the Latin word for swan, cygnus. An adult male is a cob, from Middle English cobbe; an adult female is a pen .

Friday, June 15, 2007

Tide

Tides are the cyclic rising and falling of Earth's ocean surface caused by the tidal forces of the Moon and the sun acting on the oceans. Tides cause changes in the depth of the marine and estuarine water bodies and produce oscillating currents known as tidal streams, making prediction of tides important for coastal navigation. The strip of seashore that is submerged at high tide and exposed at low tide, the intertidal zone, is an important ecological product of ocean tides The changing tide produced at a given location is the result of the changing positions of the Moon and Sun relative to the Earth coupled with the effects of Earth rotation and the local bathymetry.Sea level measured by coastal tide gauges may also be strongly affected by wind. More generally, tidal phenomena can occur in other systems besides the ocean, whenever a gravitational field that varies in time and space is present

Monday, June 11, 2007

Shark

Sharks are fish with a full cartilaginous skeleton and a streamlined body. They respire with the use of five to seven gill slits. Sharks have a covering of dermal denticles to protect their skin from injure and parasites and to improve fluid dynamics; they also have replaceable teeth.Sharks include species ranging from the hand-sized pygmy shark, Euprotomicrus bispinatus, a deep sea class of only 22 centimetres (9 in) in length, to the whale shark, Rhincodon typus, the largest fish, which grows to a length of about 12 metres (39 ft) and which, like the great whales, feeds only on plankton through filter feeding. The bull shark, Carcharhinus leucas, is the best known of several species to swim in both salt and fresh water and in deltas.

Thursday, June 07, 2007

Rose

A rose is a flowering shrub of the genus Rosa, and the flower of this shrub. There are more than a hundred classes of wild roses, all from the northern hemisphere and typically from temperate regions. The species form a group of normally prickly shrubs or climbers, and sometimes trailing plants, reaching 2–5 m tall, hardly ever reaching as high as 20 m by climbing over other plants.
Rose hips are sometimes eaten, mostly for their vitamin C content. They are typically pressed and filtered to make rose-hip syrup, as the fine hairs surrounding the seeds are unpleasant to eat. They can also be used to create herbal tea, jam, jelly and marmalade.

Friday, June 01, 2007

Industrial metal

Industrial metal is a musical genre which draws elements from industrial music and heavy metal music. Industrial metal music is typically centered around metal guitar riffs and industrial synthesizer/sequencer lines, heavily distorted, very low pitched guitars, as well as harsh vocals, but in some instances can have clean vocals. This term is used quite loosely, telling everything from industrial bands sampling metal riffs to heavy metal groups augmented with sequencers. Industrial metal encompasses industrial subgenres such as aggro-industrial and coldwave and often overlaps some elements of nu-metal and post-punk.

It is difficult to distinguish many industrial metal artists and industrial rock because both genres leave much room for ingenuity and creativity. By convention, all industrial metal artists may be more vaguely described as industrial rock as well, but not all industrial rock artists are properly described as industrial metal. The general rule of thumb is the speed and "crunchiness" of the guitars. If the guitars are fast and heavily distorted, it is likely industrial metal.